AIR-CAP3602I-C-K9

Overview

AIR-CAP3602I-C-K9 is one of the Cisco Aironet 3600 Series Access Point, which delivering up to three times more coverage versus competition for tablets, smartphones and high performance laptops, the industry’s only 4×4 MIMO, 3 spatial stream access point delivers mission critical reliability. Current solutions struggle to scale to meet demands on the wireless networks fromthe influx of diverse mobile devices and mobile applications. The new Cisco Aironet 3600 Series sustains reliable connections at higher speedsfurther from the access point than competing solutions, resulting in up to three times more availability of 450 Mbps rates, and optimizing the performance of more mobile devices.

It has following features:

•  802.11n with 4×4 multiple-input multiple-output (MIMO)
  technology with three spatial streams, which sustains 450
  Mbps rates over a greater range for more capacity and
  reliability than competing access points.
• MIMO equalization, which optimizes uplink performance and reliability by minimizing the impact of signal fading.
  Cisco ClientLink 2.0 technology to improve downlink performance to all mobile devices including one-, two-, and three spatial stream devices on 802.11n.
  Cisco CleanAir technology, which provides proactive, high-speed spectrum intelligence to combat performance problems due to wireless interference.

Brief Specs

Part number	AIR-CAP3602I-C-K9
Description	802.11n CAP w/CleanAir; 4×4:3SS; Mod; Int Ant; C Reg Domain
Wireless Type	Dual-band controller-based 802.11a/g/n
Regulatory domain	C regulatory domain ● 2.412 to 2.472 GHz; 13 channels ● 5.745 to 5.825 GHz; 5 channels
Integrated Antenna	● 2.4 GHz, Gain 2 dBi, internal Omni, horizontal beamwidth 360° ● 5 GHz, Gain 5 dBi, internal Omni, horizontal beamwidth 360°
Interface	● 10/100/1000BASE-T autosensing (RJ-45) ● Management console port (RJ-45)
Weight	2.5 lbs (1.13 kg)
Item Dimensions L x W x H	8.7 x 8.7 x 2.11 in. (22.1 x 22.1 x 5.4 cm)
System memory	● 128 MB DRAM ● 32 MB flash

Specification

AIR-CAP3602I-C-K9 Specification
Software	Cisco Unified Wireless Network Software Release 7.2 or later.
802.11n Version 2.0 (and Related) Capabilities	● 4×4 multiple-input multiple-output (MIMO) with three spatial streams ● Maximal ratio combining (MRC) ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 450 Mbps (40-MHz with 5 Ghz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ● 802.11 dynamic frequency selection (DFS) ● Cyclic shift diversity (CSD) support
Data Rates Supported	Up to 450Mbps  (802.11n, 40-MHz)
Frequency Band and 20-MHz Operating Channels	C (C regulatory domain): ● 2.412 to 2.472 GHz; 13 channels ● 5.745 to 5.825 GHz; 5 channels
Integrated Antenna	● 2.4 GHz, Gain 2 dBi, internal Omni, horizontal beamwidth 360° ● 5 GHz, Gain 5 dBi, internal Omni, horizontal beamwidth 360°
Interfaces	● 10/100/1000BASE-T autosensing (RJ-45) ● Management console port (RJ-45)
Indicators	Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	Access point (without mounting bracket): 8.7 x 8.7 x 2.11 in. (22.1 x 22.1 x 5.4 cm)
Weight	2.5 lbs (1.13 kg)
Environmental	Cisco Aironet 3600i ● Nonoperating (storage) temperature: -22 to 158°F (- 30 to 70°C) ● Operating temperature: 32 to 104°F (0 to 40°C) ● Operating humidity: 10 to 90% percent (noncondensing)
System memory	● 128 MB DRAM ● 32 MB flash
Input power requirements	● AP3600: 44 to 57 VDC ● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Power draw	● AP3600: 12.95 W Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point + cabling) to 15.4W.
Powering options	● 802.3af Ethernet Switch ● Cisco AP3600 Power Injectors (AIR-PWRINJ4=) ● Cisco AP3600 Local Power Supply (AIR-PWR-B=)
Warranty	Limited lifetime hardware warranty
Compliance Standards	UL 60950-1 ◦ CAN/CSA-C22.2 No. 60950-1 ◦ UL 2043 ◦ IEC 60950-1 ◦ EN 60950-1 ◦ EN 50155 ● Radio approvals: ◦ FCC Part 15.247, 15.407 ◦ RSS-210 (Canada) ◦ EN 300.328, EN 301.893 (Europe) ◦ ARIB-STD 66 (Japan) ◦ ARIB-STD T71 (Japan) ◦ EMI and susceptibility (Class B) ◦ FCC Part 15.107 and 15.109 ◦ ICES-003 (Canada) ◦ VCCI (Japan) ◦ EN 301.489-1 and -17 (Europe) ◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC ● IEEE Standard: ◦ IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d ● Security: ◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA ◦ 802.1X ◦ Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP) ● EAP Type(s): ◦ Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) ◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2) ◦ Protected EAP (PEAP) v0 or EAP-MSCHAPv2 ◦ Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST) ◦ PEAPv1 or EAP-Generic Token Card (GTC) ◦ EAP-Subscriber Identity Module (SIM) ● Multimedia: ◦ Wi-Fi Multimedia (WMM™ ) ● Other: ◦ FCC Bulletin OET